Inflatable decontamination showers

Decontamination showers with inflatable structure are designed for the decontamination and cleaning of personnel or materials, but it can be used as a mobile sanitary facility during rescue actions and for clean-up of accident consequences.

Decontamination shower consists of an inflatable support structure, a basin to retain used water and a shower cabin. Distribution system to apply the decontamination solution or water, with a hand held shower rose or brush, anchor system, repair set, hand pump and transport bag are included.

Selection of pictures from the inflatable decontamination showers photogallery

Shower in transportation bag

Shower used with decontamination basin

Water distribution and gloves for handling

Quick-coupling device GEKA

Inflation and safety relief valvel

show the whole photogallery

Advantages

• Designed for the decontamination and cleaning of personnel or materials as well as a mobile sanitary facility during rescue actions and for liquidation of accidents
• Long lifetime with only minimum maintenance and repair required
• Selection from many types and sizes
• Easy handling and transport
• Low weight
  
  
• Self-acting deployment within a few minutes after being connected to air supply
• Inflatable with pressure air or electrical blower
• Quick-coupling device to connect the pressure air
• Safety relief valve
  
  
• Inflatable supporting structure with one chamber, retention basin and shower cabin
• High air tightness and strength of the inflatable structure
• Exchangeable cabin and basin
• Installed distribution system with respective number of nozzles and a hand-held rose with nozzle to apply the decontamination solution or water with minimum consumption
• Green marking for the „dirty” entrance, red marking for the “clean“ exit
• Water supply through quick-coupling device GEKA with female thread G1
  
  
• Anchor set, repair set and hand pump are included
• Packed in a transport bag
  
  
• Windows made from transparent film with gloves for handling can be built-in
• A different water distribution arrangement is possible upon request
• Optional equipment with a brush
• An integrated outside basin can be added
• Optional additional equipment:
  • pumps,
  • grids and mats,
  • containers and tanks for contaminated solutions,
  • admixing device,
  • water heater etc.

Technical parameters

Shower type	Počet sprchových kabin	Internal useful area (m2)	3D model of frame	Figure	Technical parameter
GTX-S02	1	2,5			view
GTX-S04	1	2,7			view
GTX-S05	3	4,3			view
GTX-S06	1	4			view
GTX-S07	1	6			view
GTX-S09	2	8			view

Note: Data in the chart are indicative.

Download all parameters compared table (pdf 200 kB)

Colours available

Material used

Retention basin – PES textile double-sided PVC coating, high-strength, abrasion proof, water-proof, with anti-skid treatment, surface weight approx. 520 g/m²
Inflatable structure – PAD fabric double-sided rubber mixture coating, high-strength, abrasion resistant, air-proof
Shower cabin – PP textile double-sided PE coating